External Terrazzo Tile Steps Refinished in Glasgow

The photographs below are from a set of Terrazzo steps outside a house in Glasgow which had completely lost their colour after being subject to years of weather staining and believe me we see all sorts of weather up here in Scotland. The owner of the house wanted them restoring back to their natural state but naturally concerned about safety didn’t want them shiny or slippy in anyway.

Terrazzo Steps Before Cleaning and Sealing in Glasgow

Cleaning Terrazzo Steps

I could see tackling the different surfaces of the stone stairs would be tricky so rather than opt for a cleaning product I decided to use a set of diamond encrusted burnishing pad fitted to a handheld flex machine.

I started with the very coarse 50 grit pad lubricating along the way with a little water and moved up through the medium and fine pad until the job was finished. Now normally when working on stone this is followed up with the application of a very fine pad to restore a polished appearance but clearly in this case that would not be necessary. In between the application of each pad the steps were rinsed with water to remove the slurry generated in the burnishing process.

One complete I left them to dry out for a few days; fortunately I had timed my visit within a warm weather window so I was confident they should be dry when I returned.

Sealing Terrazzo Steps

I returned a few days later and after checking the stone had indeed dried out I sealed the Terrazzo with three coats of Tile Doctor Colour Grow which is a breathable impregnating sealer suitable for external application. Being an impregnator it protects the stone from within by occupying the pores in the stone where dirt might otherwise become ingrained, it also enhances the natural colours in the stone and as you can see from the photograph below the steps now look much pinker.

Terrazzo Steps After Cleaning and Sealing in Glasgow

 
 

Terrazzo Tile Steps and Grout Refreshed in Glasgow near Edinburgh Airport

Porcelain Tiled Floor & Grout Restored in Bearsden near Glasgow

The photographs below are from a 55m2 Porcelain tiled floor that we worked on recently at a house in the town of Bearsden which is an affluent suburb of Glasgow. The floor was laid well with large format tiles which were in good condition however like most floors the grout had become stained and was now patchy and inconstant in appearance.

Porcelain tile and grout before cleaning Bearsden

The owner of the property thought we may need to replace the grout however I was confident we could resolve the problem without having to resort to that.

Porcelain tile and grout before cleaning Bearsden

Deep Cleaning Porcelain Tile and Grout

To get the tile and grout clean a strong dilution of Tile Doctor Pro-Clean was applied to the floor and grout lines and left to soak in for ten minutes. Pro-Clean is an effective tile and grout cleaner that has a strong alkaline formula so it’s safe to use on all types of tiled floors including natural stone.

The solution was then scrubbed in with a rotary machine fitted with a black scrubbing pad and the recessed grout lines were scrubbed by hand using a narrow stiff brush. Once this was completed the floor was rinsed with water and the now soiled cleaning solution extracted with wet vacuum.

This cleaned up the tiles nicely and also the grout, however although improved some of the grout was still discoloured and inconstant in appearance so I recommended we apply a grout colourant which would fully restore the appearance.

Applying Grout Colourant

I let the floor dry off completely following the clean before applying a Light Grey grout colourant, one of the ten different types of grout colourant we offer, which seals and rejuvenates the grout joints. Other colours include White, Black, and Cappuccino.

The colourant is applied using a small brush and then you wipe off any excess that gets on the tile before it gets chance to dry. It’s a laborious process however it was made easier by the large format tiles which meant there was less grout to apply the colourant too than usual.

Porcelain tile and grout after cleaning Bearsden

As you can see the grout nows looks much neater and cleaner, also the epoxy formula of the colourant adds a barrier over the surface of the grout that will protect it from future discolouration and make it much easier to clean.

Porcelain tile and grout after cleaning Bearsden

 
 

Porcelain Tiled Floor Cleaned and Grout Refreshed in East Dunbartonshire

Slate Tile Cleaning and Grout Recolouring in a Linwood Kitchen

Kitchen tiles are never the easiest to keep clean. Food and drink spillages are likely to happen on a daily basis, especially if you live in a busy household. Not to mention the dirt and dust that builds up over time if the tiles are not treated to regular cleaning and maintenance. At this house in Linwood, a small town about 14 miles west of Glasgow, the Slate tiled kitchen floor, measuring approximately 8-10 square metres, wasn’t in a great state. In particular, the grout was very noticeably stained.

The property owner called me to help bring the floor back to looking it’s best again.

Slate floor tiles before grout colouring in Linwood

Cleaning Dirty Slate Tiles and Recolouring Grout

I started the restoration by cleaning the tiles and grout with Tile Doctor Neutral Tile Cleaner. This pH neutral cleaner is specially formulated for the regular cleaning of natural stone, unlike many supermarket-grade cleaners that are only really suitable for use on ceramics. The customer was also wary about the sealer on the Slate tiles being damaged, so I didn’t want to use anything stronger or acidic. Nonetheless, the Neutral Tile Cleaner did a fine job of removing any muck from the surface of the tiles and removing the stains from the grout.

Slate floor tiles during grout colouring in Linwood

I also recommended that the grout be recoloured in order to fully restore the appearance of the floor as a whole. I let the floor dry off completely following the clean, before applying our Natural Grey grout colourant, one of the ten different types of grout colourant we offer, which seals and rejuvenates the grout joints. Other colours include White, Black, and Cappuccino. In this case, I felt Natural Grey would match in best with the natural colours of the Slate. I then left the grout to dry before polishing off any excess colourant.

Slate floor tiles after grout colouring in Linwood

As you can see the grout nows looks much fresher and neater. The epoxy nature of the colourant will protect the grout from any future discolouration and make it much easier to clean. Certainly, the customer was very happy as she left the following
feedback:

“Steven contacted me quickly and we booked my job in. My Slate kitchen floor’s grout was discoloured, so we agreed he would clean and stain the grout. He came and carried out the work and he was excellent. Very happy with the work and his attitude was first class. Would highly recommend.”
 
 

Professional Tile and Grout Cleaning for a Slate Tiled Floor Restoration in Linwood

Cleaning and Sealing Heavily Soiled Slate Tiles in Gateside

On rare occasions we encounter extremely dirty tiled floors which have clearly not been cleaned for months, or even years. As you can see from the first photograph, this Slate tiled floor at a property in Gateside is an example of one of these extreme cases, being completely caked in thick layers of dirt that had amassed over a long time.

Slate floor before cleaning Gateside

While Slate is typically more hard wearing and rougher in texture many other types of tile, this doesn’t mean that it requires less frequent maintenance. With the floor measuring in at 20×20 metres, getting the tiles back to looking their best would be a big job, and certainly one that required the attention of a professional.

Slate kitchen floor before cleaning Gateside

Cleaning an Extremely Dirty Slate Tiled Floor

As the tiles were exceptionally dirty, I applied a strong dilution of our alkaline cleaner, Tile Doctor Pro Clean, which can be used for both light soil buildup and very heavy soil buildup. After applying the product, I left it to dwell for a healthy period to allow it to break down the thick layers of dirt.

Slate kitchen floor after cleaning Gateside

I then used a black scrubbing pad fixed to a heavy rotary machine to scrub the tiles, extracting the resulting slurry using a wet vac machine. Due to how dirty the tiles were, I repeated this process several times until satisfied that the tiles were as clean as possible. Next, I paid attention to the grout, cleaning it by hand, again using Pro Clean. Once this was completed, I rinsed the floor a few times with clean water to remove any trace of chemical.

Slate floor after cleaning Gateside

Sealing a Slate Tiled Floor

I was keen to seal the floor the following day, so I installed a fan overnight to speed up the drying process. As many will already know, a tiled floor cannot be sealed until it is completely dry, or else the excess moisture will cloud the sealer.

Upon my return to the property the next morning, I used Tile Doctor High Shine to seal the floor as requested by the customer. This sealer is specifically designed for use on textured natural stone such as Slate, providing a durable, resistant and high shine surface seal. I applied four coats in total.

Slate kitchen floor after cleaning Gateside

The customer wasn’t at home when I finished the job, but he sent me a text later in the day to say just how impressed he was with the transformation of the floor. Another satisfied customer!

Slate kitchen floor after cleaning sealing Gateside

 
 

Professional Restoration of a Heavily Soiled Slate Tiled Floor in Ayrshire

Black Slate Kitchen Tiles Rejuvenated in Paisley

This customer, who lives in Paisley, one of Scotland’s biggest towns – and one with a rich history in the textiles industry – had not been completely satisfied with her Slate tiled kitchen floor since it had been laid. Having only been laid recently, the tiles themselves were in good shape, but they lacked the aesthetic quality desired by the customer.

She wanted them to be a richer, darker black in colour while keeping the matte look – as she had seen advertised in the tile shop – but once laid the tiles had been left looking rather unexceptional. The floor area itself was only small (at around 12 metres squared), and I was confident I could have it looking much nicer in no time at all using the right products.

Slate Floor Cleaned in Paisley

Cleaning a Slate Tiled Kitchen Floor

To begin, I stripped away any previous sealer using a diluted mixture of Tile Doctor Pro Clean and Tile Doctor Remove and Go scrubbed into the tiles. This also helped to remove and bits of dirt and dust left on the floor. While the tiles, as mentioned, were in relatively good nick, I wanted to get the floor as clean as possible before giving it a fresh seal and my chosen combination of products did not let me down.

The floor was then neutralised with clean water, removing any outstanding cleaning chemicals, and the resulting cleaning slurry was promptly removed using a wet-vac machine. To finish the clean, I washed the tiles in pH Neutral Tile Cleaner, leaving it fresh and ready to be sealed.

Sealing a Slate Tiled Kitchen Floor

The next day I returned to the property to seal the Slate tiles making sure first that the tiles were dry. To restore the colour and texture of the Slate I started with an application of Tile Doctor Stone Oil which impregnates the pores of the stone and like a sealer provides a barrier to ingrained dirt once cured. To maintain the matt finish, as requested by the customer, I added a coat of Tile Doctor Ultra Seal.

Slate Floor Treated with stone oil in Paisley

Just looking at the before and after photographs it’s clear to see that the customer got that the exact result she had requested. Stone Oil worked wonders to restore the rich, dark tones to the Slate that had been so sorely lacking previously. The customer can also be assured that the sealer will be keep the floor easy to clean for a long time to come.

Slate Floor Cleaned and seaeled in Paisley

 
 

Professional Tile Cleaning and Sealing for a Slate Tiled Kitchen Floor in Glasgow

Slate Kitchen Floor Stripped Cleaned And Sealed Lochwinnoch

These photographs of a Slate tiled kitchen floor are from a house in Lochwinnoch in the west central Lowlands of Scotland. You can see that the slate and grout was looking very dull and any sealer that was present had failed leaving the stone in need of a deep clean and re-seal.

Slate Floor Before Cleaning in Lochwinnoch

Cleaning Slate Floor Tile and Grout

On the first day we stripped the floor of any remaining sealer using Tile Doctor Pro-Clean mixed 50/50 with Remove and Go, this was left to dwell for 5-10mins before scrubbing it in with a scrubbing pad and then extracting the slurry with a wet vacuum. It was important to ensure all the sealer was removed in order to get an even finish and to avoid any compatibility issues when re-sealing later.

Slate Floor During Cleaning in Lochwinnoch

After this we focused on cleaning the grout using more Pro-Clean this time worked in using a stiff grout brush by hand. Once done the floor was given a thorough rinse using a diluted solution of Tile Doctor Neutral Clean to remove any trace of cleaning solutions that may impact the sealer and again using the wet vacuum to get the floor as dry as possible.

Sealing Slate Floor Tiles

The floor was left to dry off overnight and then we returned on the second day to seal the slate with Tile Doctor Seal and Go which is a water based sealer (no smell) which adds a nice sheen to the tile and gave the desired finish. Slate is quite porous so five coats of Seal and Go were required to ensure the floor was fully sealed.

Slate Floor After Cleaning and Sealing in Lochwinnoch

 
 

Cleaning and Sealing a Slate tiled floor in Renfrewshire

Refreshing Bathroom Wall and Floor Grout in Paisley

To clean grout we normally recommend a good scrub with Tile Doctor Pro-Clean which is an strong alkaline product, in some cases however the staining cannot be removed completely and the only thing your can do with the exception of re-grouting is to re-colour the grout with a Grout Colourant which are available in ten popular colours.

In the case of this bathroom at a house in Paisley near Glasgow both the floor of the bathroom and the shower wall tiles were in need of a refresh and after a review of possible solutions is was agreed the easiest thing to do would be to re-colour the floor grout with a Light Grey colourant and the wall tiles with a White colourant.

Bathroom Floor Paisley Before Grout Colouring Shower Wall Tiles Paisley Before Grout Colouring

Cleaning and Colouring Grout

The first step before grout colouring is to give the grout a good scrub with Tile Doctor Pro-Clean to get it as clean as possible before applying the colourant. The grout was then rinsed and then dried ready for the colourant to be applied. You may be surprised to hear but we often find the biggest cause of staining to grout are the dyes contained in soaps and shampoos.

Once the grout is ready it’s a straightforward process of applying the colourant evenly along with thin coats along the grout line working the brush backwards and forwards whilst minimising the amount that gets on the tile. We were not changing the colour of the grout substantially so one coat of colourant was sufficient for both sets of tile.

With two colours being applied we were careful to ensure different brushes were used for each job to avoid any contamination and once the job was complete a damp pad was used to remove excess product from the tile surface.

Bathroom Floor Paisley After Grout Colouring Shower Wall Tiles Paisley After Grout Colouring

As you can see from the photographs the difference was immediate, the other advantage of the colourant is it forms a barrier over the grout protecting it from staining and making it easier to clean going forward.
 
 

Quarry Tile and Grout Cleaning and Colouring in Livingston, West Lothian

Ceramic Tiled Bathroom Refresh in Kilmacolm

This bathtub with shower over was at a house in the village of Kilmacolm near Greenock. As you can see from the photograph below the grout was stained in places and a tile had become loose behind the taps due to a previous leak causing it to fall out.

Bathroom Refresh Before Kilmacolm

Refreshing a Ceramic Tiles Bathroom

The first job was to put the loose ceramic tile back on the wall, a process involving the scraping off the adhesive and grout from the wall and tile before re-fixing with fresh tile adhesive and the grouting. We placed a blanket in the bathtub during the work to protect it.

Next the tiles were given a wash down Tile Doctor Pro-Clean with particular attention paid to the grout by scrubbing it with a stiff brush. It was our intention to use a grout colourant on the grout and I wanted to ensure we had a good bond.

Whilst the tiles were drying I set about stripping off the old silicone sealant between the bath and the ceramic tiles wall, debris cleared and any remaining sealant was carefully scraped away and then replaced with new silicone.

Grout Colouring

Last step was to apply two coats of white Tile Doctor Grout Colourant, this product is basically painted on top of the existing grout with any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long lasting barrier protecting the grout and also making it much easier to clean, it looks natural and combined with the new silicone it gave the whole bath surround a real uplift.

Bathroom in Kilmacolm After Refresh

The job was completed in a day and I think you will agree the whole bath area now looks like a new installation.
 
 

Refreshing a ceramic tiled surround in the Clyde Valley

Natural Rough Slate Tiles Renovated at Stirling Business Park

The photographs on this page are of a natural Rough Slate tiled floor installed in the ground floor and stairs of the Touch Business Centre in Stirling where recent building renovation works had left the floor covered in dirt and plaster dust which they couldn’t remove. The owner of the business centre now needed the floor renovating prior to renting out the units to new tenants.

Dating from around 1750 the business units had been converted within the stable block of a large house; now a listed building they would originally have been used for horses and carriages before becoming a milking parlour, estate workshops and garages. The conversion was supported by Historic Scotland and had to retain the feel and features of an historic building and the slate floor was an important part of this.

Natural Rough Slate Tiled Floor Touch Estate Before Cleaning

Cleaning Slate Floor Tile and Grout

To remove the dirt and plaster we used a dilution of Tile Doctor Remove and Go which is a strong coatings remover that’s safe to use on natural stone but also very effective. It was mopped onto the tile and left for around twenty minutes to allow it to soak into the pores of the tile and get to work and break down and soften any remaining sealer and plaster etc. This was then scrubbed into the tiles using a black pad fitted to a rotary machine running on a slow speed; the resultant soiled cleaning solution was then extracted using a wet vacuum, the floor rinsed and the process repeated until we were satisfied the floor was completely clean.

Natural Rough Slate Tiled Stairs Touch Estate During Sealing Natural Rough Slate Tiled Stairs Touch Estate During Sealing

Sealing Slate Floor Tiles

After allowing the floor sufficient time to dry we returned on-site to seal the slate tile and protect it from stains etc checking first with a damp meter that the tiles were indeed dry. To seal the floor we used five coats of Tile Doctor Seal and Go which is a water based sealer (no smell) which adds a nice sheen to the tile and gave the desired finish.

Natural Rough Slate Tiled Floor Touch Estate After Cleaning and Sealing

 
 

Cleaning and Sealing a Slate tiled floors after Building works in Sterling

Restoring an Old Quarry Tiled Church Floor in Greenock

The photographs below are from the Lyle Kirk Church of Scotland in Greenock where we asked to clean the Quarry tiles in the main entrance of the church. As you can imagine the floor is very busy and is constantly in use from parishioners and had now become very unappealing from ingrained dirt and was proving impossible to clean effectively.

Lyle Kirk Church Quarry Tiles Before Cleaning Greenock Lyle Kirk Church Quarry Tiles Before Cleaning Greenock

Cleaning Old Quarry Tiles

With such an old floor we had to take a lot of care and so using a buffer machine to speed up the process was out of the question. As a result so we cleaned the whole tiled floor including the grout by hand using various strength dilutions of Tile Doctor Remove and Go and then Pro-Clean to remove the years of wax and coatings from the tiles, both products I should mention are safe to use on tile, stone and grout. It was arduous and slow work taking us four days to complete and the floor was given a thorough wash down once clean to remove any trace of cleaning product before sealing.

Dealing with Efflorescence

Whilst cleaning the floor we noticed some signs of efflorescence which is where salts from the ground below evaporate up through the pores in the tile and leave white deposits on the surface of the tile above. The efflorescence was removed easily using Tile Doctor Grout Clean-Up but it alerted us to the fact that normally old floors were traditionally laid directly on compacted earth with no damp proof course and that damp could be an issue that could affect the sealer.

Lyle Kirk Church Greenock

Sealing an old Quarry Tiled Floor

We left the floor to dry off and when we returned being cognizant of the damp issue we chose Tile Doctor Seal and Go Extra to seal the floor, this a new sealing product which is highly breathable and ideal for sealing external tiles or internal tiles where there is a damp problem. Four coats were sufficient and once done the floor looked completely transformed.

Lyle Kirk Church Quarry Tiles After Cleaning Greenock Lyle Kirk Church Quarry Tiles After Cleaning Greenock

 
 

Church Floor restored in Greenock

Moroccan Encaustic Cement Tiled WC Refresh in Barrhead

Similar in many ways to Victorian tiles, these are Moroccan Encaustic Cement tiles which come in a huge range of patterns and are ideal for indoor and external use although they should be sealed to protect against water penetration and dirt as well as making cleaning easier. Very popular in hot countries, they certainly add a nice flair which they have done to this ground floor WC at residence in Barrhead which is a town south west of Glasgow in East Renfrewshire.

Moroccan Encaustic Cement Tiles Barrhead Before Cleaning

Cleaning a Victorian Floor

The tiles were looking rather dull and in need of a deep clean and re-seal so the first job was to clean the floor and remove and remaining sealer by applying a strong solution of Tile Doctor Pro-Clean worked in using a black scrubbing pad fitted to a rotary bonnet machine, with all the excess extracted using a wet vacuum. This process was repeated three times until I was satisfied any remaining sealer had been removed and the tile and grout was now as clean as it could be. The floor was then given a rinse with water and cleaned again with Tile Doctor Neutral Tile Cleaner to remove any trace of Pro-Clean; again the fluids were extracted using a wet vacuum.

Sealing a Victorian Floor Sealing

The floor was left to dry overnight and we came back the next day to seal it using six coats of Tile Doctor Seal and Go which works well on these types of tiles as it adds a nice subtle sheen as well as adding the necessary stain protection.

Moroccan Encaustic Cement Tiles Barrhead After Cleaning

 
 

Moroccan Tiled floor cleaned and sealed in Renfrewshire

Deep Cleaning Porcelain Bathroom Tiles in Inchinnan

The Porcelain tiles in this bathroom installed at a house in the small village Inchinnan were in good physical condition but were looking dull and being let down by the grout which had gone dark in a number of areas. This is often the case with Porcelain floors which are very tough and generally out-live the life of the grout which has a porous top layer that is subject to staining especially from the dyes in personal products.

Porcelain tiled shower room in Inchinnan before

Deep Cleaning Porcelain Tile and Grout

To get the tile and grout really clean a strong dilution of Tile Doctor Pro-Clean was applied to the tile and grout and left to soak in to the surface for around ten minutes before scrubbing it in; the area was quite restrictive so this process was done by hand. The soiled cleaning solution was then then rinsed away with warm water which was removed by a wet vacuum and stubborn areas sport treated. The floor was then given a final wash with Tile Doctor Neutral Cleaner diluted with water to remove any remnants of Pro-Clean and then dried as much as possible.

Grout Colouring

The cleaning process made a big difference to the Tile and Grout however there grout still showed evidence of staining. To resolve this we would have need to laboriously scrape out the grout and re-grout it; however this does take a long time and there is a quicker solution by using a Grout Colourant. Grout Colourants apply a thin but impermeable epoxy layer on top of the existing grout and come in a range of colours which is handy if you want to completely alter the look of your floor. In this case however the customer was happy to have the white original colour of the grout restored; two coats were sufficient to achieve this.

Once done and dry we gave the floor another rinse with Neutral Cleaner and finished by buffing the Porcelain tiles with a white pad on a hand polishing machine which brought up the natural shine on the tiles.

Porcelain tiled shower room in Inchinnan after

 
 

Rejuvenating Bathroom Tiles in Renfrewshire

Slate tiled kitchen floor cleaned and re-sealed in Huston

This particular Slate tiled floor was installed in the kitchen of a house in Huston, that’s Houston near Glasgow not the city in Texas. This is another example of a natural stone floor was overdue a deep clean and re-seal, any remaining sealer on the slate has worn off and the tiles have become dull and stained.

Slate tiled floor Huston before cleaning

Cleaning Slate Floor Tile and Grout

First we stripped any remaining sealer from the slate tiles by applying a strong solution of Tile Doctor Pro-Clean which was left to soak in before being worked into the stone using a black pad on a rotary bonnet machine; the resultant soiled cleaning solution was then extracted using a wet vacuum. This process was repeated three times to make sure all the sealer and dirt was completely removed and extracted.

After this we focused on cleaning the grout using more Pro-Clean this time worked in using a stiff grout brush by hand. Once done the floor was given a thorough rinse using clean water again using the wet vacuum to remove the water and get the floor as dry as possible.

Changing the Colour of Grout

We then left for the evening to allow the floor to dry off overnight and returned the second day and coloured the grout to dark grey using a grout colouring kit to achieve an even grout appearance. This is rather painstaking work but the effect is well worth the effort, then once that had dried we gave the floor a quick clean using Tile Doctor Neutral Cleaner.

Sealing Slate Floor Tiles

After allowing to dry overnight again, we came back the third day to seal the slate tiles for which we used six coats of Tile Doctor Seal and Go which is a water based sealer (no smell) which added a nice sheen to the tile and gave the desired finish.

Slate tiled floor Huston after cleaning and sealing

 
 

Cleaning and Sealing a Slate tiled floors in Huston, Renfrewshire

Deep Cleaning Porcelain Kitchen Tiles in Glasgow

Porcelain tiles are very hard wearing and a great choice for kitchens where they are likely to see a large amount of foot traffic, you do need to be careful however if they are the micro porous porcelain which as the name suggests are slightly porous and can trap dirt and become difficult to clean. The other problem you are likely to have with any tiled floor is the grout which has a porous top layer that can become stained.

This was the case with the kitchen floor tiles at this house in Glasgow where you can see from the photograph below the improvement in the centre of the floor where we had test cleaned the tiles; the grout used was dark in colour which hides the dirt so unfortunately you cannot tell from the photograph the improvement in the grout.

Porcelain Tiles Glasgow Before Deep Cleaning

Deep Cleaning Porcelain Tile and Grout

To get the tile and grout really clean a strong dilution of Tile Doctor Pro-Clean was applied and left to soak in to the surface for around ten minutes before scrubbing it into the tile with a bonnet machine fitted with a black scrubbing pad and also a stiff hand brush along the grout lines. This was then rinsed away with warm water all of which was removed by a wet Vacuum. This whole process was repeated three times until we were satisfied that the tile and the grout was looking new again after which the floor was given a final wash with Tile Doctor Neutral Cleaner and then dried as much as possible using the wet vacuum.

Porcelain Tiles Glasgow After Deep Cleaning

 
 

Deep Cleaning Porcelain Kitchen Tiles in Glasgow

Terrazzo Vestibule Refreshed in Glasgow

Just to prove we take on any job large or small I thought I would post the details of this small Terrazzo Vestibule that we recently cleaned at the entrance to a house in Glasgow. The Terrazzo was not looking its best which is hardly surprising being in front of the main entrance to the house it must have seen a lot of foot traffic over the years.

Terrazzo vestibule before cleaning in Glasgow

Cleaning and Burnishing a Terrazzo Floor

Terrazzo is a very hard surface and as a result it has to be treated in the same way as other hard surfaces such as Travertine, Limestone and Marble which typically involve burnishing the surface to remove the dirt and restore the appearance.

Before burnishing the floor was cleaned using a strong dilution of Tile Doctor Pro-Clean which was left to dwell on the Terrazzo for a while before being scrubbed in by hand due to it being such a small area; following that the floor was given a quick rinse with water and a quick clean with Tile Doctor Neutral Cleaner to remove any trace of strong cleaning product.

The next step was to burnish the floor using a set of four diamond encrusted burnishing pads. You start with a coarse 400 grit burnishing pad which is run over the surface with a little water to help lubricate and this removes surface dirt and coatings such as sealers. Once that was finished we moved onto the medium 800 grit pad which is the first step of the polishing process and also removes ingrained dirt. The surface of the Terrazzo is still quite rough at this stage so once complete with the medium pad the fine (1,500 grit) is used smooth down the surface and continue to build up the polish in the floor. The last pad is a very fine (3,000 grit pad) and this pad builds on the existing polished effect to create a high shine finish.

All these pads are applied with water and the resultant slurry needs to be cleaned off during the process with the final step of giving the floor a thorough rinse with clean water.

Sealing a Terrazzo Floor

Once the floor was completely dry it was sealed using two coats of Tile Doctor Colour Grow which is an impregnating sealer designed to bring out the natural colours in the stone and penetrate into the pores of the tile preventing dirt from getting in there and providing maximum on-going stain protection. The floor was then buffed using a white buffing pad to bring up the shine further and remove any smears left from sealing.

Terrazzo vestibule After cleaning and sealing in Glasgow

 
 

Deep Cleaning a Terrazzo Vestibule in Glasgow

Dark Slate tiles cleaned and Grout Coloured in Glasgow

Slate is a hard-wearing product ideal for floors however it does need a sealer to bring out the best in it and sealers do wear off after a few years and this had happened with the Slate tiled floor in this post. The floor was now looking dull and the grout had also discoloured so time to call in Tile Doctor to breathe new life into the tile and grout.

Dark slate tiled floor glasgow before cleaning

Cleaning a Slate Floor

It’s not a good idea to apply a new sealer on-top of existing as it can affect the final result so the first task was to strip back the floor to the natural stone giving the Slate and Grout a thorough clean in the process.

To do this a strong solution of Tile Doctor Tile Doctor Pro-Clean was applied and left to soak into the floor for about 20 minutes; Pro-Clean has a strong alkaline base so it’s safe to use on Stone as opposed to a weak acid cleaner. After twenty minutes it was worked into the slate and grout using a low speed bonnet machine fitted with a black scrubbing pad with the excess extracted using a wet vacuum.

This process was repeated three times to make sure all the old sealer and dirt was completely removed and after this the grout was cleaned by hand using more Pro-Clean and a stiff brush. Once done the whole floor was then neutralised with more water to ensure there was no trace of cleaning product remaining on the floor prior to sealing.

Grout Colouring

The floor was left to dry off overnight and returned the second day to colour the grout to dark grey which made a big improvement to the overall look of the floor; the grout colours we use come in 12 colours so we can usually find one that matches the customers’ requirements, once applied they also form a great barrier preventing future staining. Once the colourant has dried the floor was given a further clean with Tile Doctor Neutral Cleaner which is an everyday cleaning product we recommend for sealed floors.

Sealing a Slate Floor Sealing

The floor was left to dry and we came back two days later to re-seal the tile for which we used five coats of Tile Doctor Seal and Go which is a great sealer for Slate tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. I should mention that Seal and Go is also a water based sealer so it doesn’t leave a smell whilst it’s drying.

Dark slate tiled floor glasgow after cleaning

We left the floor to dry overnight again and came back the third day to seal the Slate tiles for which we used six coats of Tile Doctor Seal and Go which give a subtle shine to the tiles and matched the customers requirements.
 
 

Cleaning and Sealing Slate tiled floors in Glasgow

Slate Tiled Staircase Cleaned and Sealed in Glasgow

These photographs were taken some time ago however I thought they might be interesting as Glasgow has an interesting mix of architecture and occasionally we are asked to clean some unusual buildings including this one which had a stone winding staircase faced with slate tile which was overdue for a clean and seal.

Slate tiled stairs in Glasgow before Slate tiled stairs in Glasgow before

Cleaning a Slate Tiled Staircase

Stairs are a high traffic area and if there was any sealer left on the slate treads it was minimal so I decided to apply a strong dilution of Tile Doctor Pro-Clean. This was left on to soak into the slate tiles for about 20 minutes before being scrubbed in by hand (no room for a rotary machine).

Slate tiled stairs in Glasgow before

This was worked into the slate and grout until I was happy the tile and grout was clean. The soiled cleaning solution was removed using a wet vacuum and the floor neutralised with more water to ensure no chemicals remained on the floor prior to sealing.

Sealing a Slate Tiled Staircase

It was a small area so it only took a few hours for the tiles to dry so later that afternoon I was able to seal the slate for which we used five coats of Tile Doctor Seal and Go which adds a nice subtle sheen finish and will protect the tiles from staining going forward.

Slate tiled stairs in Glasgow after Slate tiled stairs in Glasgow after

 
 

Cleaning and Sealing Slate tiled stairs in Glasgow

Grubby Ceramic Tiled Shower Cubicle Refreshed in Bishopton

This shower cubicle was installed in the main bathroom of a house in Bishopton where the grout had become quite grubby and the Ceramic tiles were looking quite dull. The owner was thinking about re-tiling the bathroom and thought they would give us a call first to see if we could refresh the look without the expense.

Gruby Ceramic Tiled Shower in Bishopton Before Gruby Ceramic Tiled Shower in Bishopton Before

Cleaning Ceramic Tile and Grout

We started by spraying the tiles with Tile Doctor Oxy-Pro which is a strong high-alkaline cleaner especially formulated and packaged for cleaning showers. The spray delivery is important as mixing the cleaning product with air makes it lighter and helps it cling to the tile and grout. The Oxy-Pro was left to soak into the tiles for around 15 minutes before being scrubbed into the tile and grout using a stiff grout brush. This action cleaned up the grout and tile nicely removing stains from shampoos and soaps etc.

Removing Mould from Grout

The grout was looking much improved but there was however some evidence of mould remaining which needed dealing with. To tackle this we used Tile Doctor Mould Away which is designed to remove mould off Silicone and Grout. It’s very easy to use, you simply spray the Silicone or Grout to be treated with Mould Away then leave to soak in for five minutes and then scrub with a brush and rinse with water repeating the process until the mould has disappeared.

Gruby Ceramic Tiled Shower in Bishopton After Gruby Ceramic Tiled Shower in Bishopton After

It took a fair amount of manual effort but the results were well worth it as you can see.

Mouldy Ceramic Tiled Shower Refreshed in Glasgow

A customer contacted us regarding a Ceramic Tiled Shower Cubicle problem they had with their house in Glasgow. The grout and mastic sealant had started to discolour and there was staining on both from mould which is quite a common problem in modern houses and our busy lifestyles and insulated homes with insufficient ventilation.

Cleaning Ceramic Tile and Grout

We started by giving the tiles a good scrub with Tile Doctor Pro-Clean then focusing on the grout we thoroughly scrubbed it with more Pro-Clean and a stiff grout brush, this process did well to clean up the tile and grout but unfortunately the grout had become too badly stained to be satisfactory. It’s a fact that the top layer of grout is actually porous and this is where the staining from the dyes in shampoos etc. will occur.

The next step was to cut out all the old and mouldy mastic and seal around the shower using a sharp knife taking care not to scratch the shower tray.

Glasgow Ceramic Shower Refresh Before Cleaning Glasgow Ceramic Shower Refresh After Cleaning

Recolouring Grout

To overcome the stained grout issue we gave the whole of the grout two coats of white Grout Colourant which is a very effective treatment that forms an epoxy barrier over the gout protecting it from future staining. Normally when you do this we recommend using a pre-treater product that provides a chemical key that allows the colourant to latch on to, in this case however I was happy that the scrubbing we gave the grout with Pro-Clean would have the same effect. The tiles were then wiped down using Tile Doctor Neutral Cleaner to remove any excess colourant from the tiles and give them a finishing shine.

The last step was to Shower was finished off by applying new silicone sealant to the areas that were removed. The final result was a shower cubicle that looked recently installed.
 
 

Refreshing a Ceramic Tiled Shower Cubicle in Glasgow

Flagstone Tiles Cleaned and Sealed in Glasgow

These photographs are of a Flagstone floor tiled floor installed at a house in Glasgow. They were well worn, looking washed out and overdue a deep clean and re-seal, there was also remnants of adhesive and paint and I suspect the floor had been covered in carpet at some point in the past.

Cleaning Flagstones in Glasgow

Cleaning Flagstone Floor Tiles

Working in sections the tiles were covered in Tile Doctor Remove and Go which as the name suggests is designed to safely remove coatings from tiles, this was left to soak in for a while before scrapping off the glue and paint from the stone surface using a wire brush and paint scrapers.

The second step was to scrub the floor using a strong dilution of Tile Doctor Pro-Clean worked in using a rotary bonnet machine fitted with a hard nylon brush attachment. The floor was then then rinsed down with clean water and the soiled solution extracted using and industrial wet vacuum. This process was completed three to four times to ensure all the dirt was removed.

The floor was then left to dry assisted by a turbo air mover and damaged pointing and cracks between the stone was patched up using a sand/cement mortar. The cleaning and repairing process took most of the day so once complete we left for the day leaving the turbo air mover switched on to ensure the floor would be nice and dry of the next day.

Cleaning Flagstones in Glasgow Cleaning Flagstones in Glasgow

Sealing Flagstones

We returned the next day and once we had checked the stone had dried we proceed to seal it using five coats of Tile Doctor Seal and Go which will protect the floor and also adds a nice sheen to the tile.

Cleaning Flagstones in Glasgow

 
 

Flagstone floor cleaned and sealed in Glasgow

Victorian Mosaic Hallway Tiles Cleaned and Sealed in Glasgow

These unusual period Victorian mosaic tiled floor at a residence in the west end of Glasgow were far from looking their best and well overdue for a deep clean and re-seal.

Victorian Mosaic tiles glasgow before cleaning Victorian Mosaic tiles glasgow before cleaning

Cleaning a Victorian Floor

I’ll try and keep the details short so as not to lose your attention but basically the tiles were first stripped from all sealers and coatings that had been previously applied to the floor using a strong dilution of Tile Doctor Remove and Go which was left to dwell for an hour before working it in with a rotary machine fitted with a black scrubbing pad and then rinsing the floor with water which was extracted with a wet vacuum. Secondly we then cleaned the floor four times using a rotary machine and a strong mixture of Pro-Clean which was again wet extracted and rinsed again. Finally we cleaned and rinsed the floor using Tile Doctor Neutral Cleaner to neutralise the tiles from any products which may affect the sealer before leaving the floor overnight to dry assisted with a turbo air mover.

Sealing a Victorian Floor Sealing

Once the floor was dry it was then sealed using two coats of Tile Doctor Colour Grow which brings out the colour in the tile and provides the matt effect the owners were looking for as well as protecting the floor from staining.

Victorian Mosaic tiles glasgow after cleaning Victorian Mosaic tiles glasgow after cleaning

 
 

Victorian Mosaic Tiled floor cleaned and sealed in Glasgow

Slate Tiles Cleaned and Sealed in a Glasgow Kitchen

These Slate tiles were installed in the kitchen of a house in Glasgow and as you can see from the photograph below they were looking dull and tired and there was evidence of grout haze over a lot of the tiles. The Tile Doctor diagnosis was that a face lift was in order for which a deep clean and re-seal was prescribed.

Slate Tiles in Glasgow Kitchen Before Cleaning

Cleaning a Slate Floor

The first step was to sweep up all the loose debris from the floor; we scrub the floor quite hard during our work so it’s important to remove any grit that could scratch the surface of the tile. We then mixed a dilution of Tile Doctor Remove and Go 50/50 with Nanotech Ultra Clean and began to work the solution into the floor allowing it to dwell for around an hour first (This process helps to soften and break down the remains of the sealer on the stone). We used a hard deck scrubber to agitate the chemicals and loosen the dirt and old sealer from the floor which is then extracted from the surface using a wet vacuum and rinsed down with clean water several times to make sure all chemicals are removed.

The next step was to apply a dilution of Tile Doctor Grout Clean-up which was then scrubbed the floor once again with hard deck scrubber. This broke down and removed all of the cement/ grout haze that the installer had left over the surface of the tile, again the floor was then rinsed with water and extracted to remove any chemical residue.

The floor was scrubbed again this time using a dilution of Tile Doctor Pro-Clean to make sure all old sealer, cement, grout haze and dirt had been completely removed. We then give the floor a thorough and final rinse and mopped the tiles with Neutral Tile Cleaner to neutralise any remaining trace of chemicals and removed the solution using the wet vacuum before leaving the floor to dry overnight.

Sealing a Slate Floor Sealing

Once the floor was dry it was then sealed using five coats of Tile Doctor Seal and Go which was chosen to provide the desired finish that the customer wanted.

Slate Tiles in Glasgow Kitchen After Cleaning and sealing

 
 

Slate Tiled Kitchen floor cleaned and sealed in Glasgow

Terrazzo Floor Cleaned at Kilmacolm School

This Terrazzo Floor was at the entrance to a School in Kilmacolm where as you can see from the photograph below had come under some heavy use and was now proving difficult to keep clean. We were asked to give it a deep clean, polish and re-seal therefore making it much easier to maintain going forward.

School Terrazzo Floor Kilmacolm before cleaning

Cleaning a Slate Floor

Hard stone surfaces such as Terrazzo have to be burnished to get the shine back and this process basically involves cutting back the surface with a set of diamond encrusted burnishing pads.

Before burnishing however the floor was swept out to remove any loose debris that could get caught under the pads and scratch the floor. Once that was done a Coarse 400 grit burnishing pad was fitted to our heavy rotary machine and run over the surface with a little water to help lubricate the process, the coarse pad removes surface dirt and coatings such as sealers. Once that was finished we moved onto the medium 800 grit pad which is the first step of the polishing process and also removed ingrained dirt. The surface of the Terrazzo is still quite rough at this stage so once complete with the medium pad the fine (1,500 grit) is used smooth down the surface and continue to build up the polish in the floor. The last pad is a very fine (3,000 grit pad) and this pad builds on the existing polished effect to create a high shine finish.

All these pads are applied with water and the resultant slurry needs to be cleaned off during the process with the final step of giving the floor a thorough rinse with clean water, I can recommend a wet vacuum at this point as it makes light work of removing liquids from floors.

Sealing a Terrazzo Floor

Once the floor was completely dry it was sealed using two coats of Tile Doctor Colour Grow which is a great product to use of these characteristic floors as it brings out the colour in the floor as well as providing on-going stain protection. The floor was then buffed using a white buffing pad to bring up the shine further; needless to say our client was extremely happy with the finished result.

School Terrazzo Floor Kilmacolm after cleaning

 
 

School Terrazzo floor Cleaned, Polished and Sealed

Slate tiled floor cleaned and re-sealed in Glasgow

The photographs below are from the Kitchen of a house in Glasgow with a Slate tiled floor fitted. The sealer on the slate has started to go and if you look closely at the photographs you can see how tired and dull the tiles are looking; this is a common problem with natural stone floors where you will find the sealer wears down and dirt starts to penetrate into the tile making it difficult to clean effectively.

Slate Kitchen Floor Tiles Glasgow before cleaning Slate Kitchen Floor Tiles Glasgow before cleaning

Cleaning a Slate Floor

The first job with any clean and seal work of this nature is to protect the kitchen units by removing the kick boards and then to remove any sealers and coating from the tile so when you re-seal you’re not trapping in dirt or layering on top of another potentially incompatible sealer.

The original sealer had almost worn off so a strong dilution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean was applied and left to soak into the floor for about 20 minutes. Pro-Clean is a multi-purpose cleaning product that will strip a sealer off the floor if weakly diluted whereas the NanoTech Ultra Clean adds tiny abrasive particles into the mixture increasing the cleaning power of the solution. This was worked into the slate and grout using a buffing machine fitted with a black scrubbing pad until I was satisfied the floor had been stripped and cleaned of all surface coatings and dirt. All the dirty water was extracted with a wet vacuum and the floor neutralised with more water to ensure no chemicals remained on the floor prior to sealing.

Sealing a Slate Floor Sealing

The floor was left to dry and we came back two days later to re-seal the tile for which we used five coats of Tile Doctor Seal and Go which is a great sealer for Slate tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. I should mention that Seal and Go is also a water based sealer so it doesn’t leave a smell whilst it’s drying.

Slate Kitchen Floor Tiles Glasgow after cleaning Slate Kitchen Floor Tiles Glasgow after cleaning

Overall I was quite pleased with the floor although there were some stubborn grout stains that proved to be tough to shift.

Cleaning and Sealing Slate tiled floors in Glasgow

Mouldy Travertine tiled bathroom cleaned in Glasgow

This mouldy filled Travertine tiled bathroom was located in a house in Glasgow and as you can see from the photograph below was completely covered in mould right round the whole bathroom, there was also some staining from the dyes in soap etc.

Mouldy Filled Travertine Tiled Shower Before Cleaning

Cleaning a mouldy Travertine tiled bathroom

Firstly we cut out all the mouldy silicone with a sharp knife and once this was done we mixed a strong solution of Tile Doctor Pro-Clean in a spray bottle and sprayed the cleaning product onto the walls, we used a spray as the air makes the solution lighter and stick onto the tile. Once this was done the Pro-Clean was scrubbed into the stone with stiff brushes and a lot of elbow grease using small nail brushes to allow us to get into all the tiny dimples in the filled travertine. Travertine is a natural product so Pro-Clean being a strong alkaline product is ideal for cleaning natural stone as even mildly acidic cleaners can eat away at the stone.

Sealing Travertine Tiles

Once the tiles were cleaned they were then sealed with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer which is designed to protect the stone whilst lifting the colours out.

Grout Colouring

The grout was still discoloured following the cleaning process so to get it looking fresh again and after the stone was sealed we applied white grout colourant which brought the grout back to perfect white. This was done after sealing to stop the colourant absorbing into the tiles when they were un-protected making it easier to wipe off. The grout colourant we use looks natural and also forms a barrier over the grout making it easy to clean.

Once everything else was complete we finished the job off by renewing the white silicone up the corners of the walls and around the bath; the end result was a huge transformation that both us and the customer were more than happy with.

Filled Travertine Tiled Shower After Cleaning

 
 

Mouldy Travertine tiles rejuvenated in Glasgow

Marble Tiled Pantry Cleaned and Polished at Kinross House

This Marble tiled floor is located in the pantry of the historical Kinross House which is a late 17th-century country house overlooking Loch Leven that was built by the architect Sir William Bruce as his own home in 1686. You can see from the photograph the floor was in quite a state and given the history it was an honour to be asked to work on the floor.

Kinross House, Kinross, Kinross-shire, Scotland

Photo Courtesy of Kinross House, Kinross, Kinross-shire, Scotland

Marble Tile Cleaning and Polishing

We brushed out the floor to remove all the loose debris and then proceeded to restore the floor using a set of diamond encrusted burnishing pads which fit a rotary buffing machine. The burnishing process is designed to grind out dirt in the stone and smooth /polish the floor, you start with a course pad and work your way through the four pad set until you get to the finer polishing pad. This may sounds simple but it does take time to complete.

Marble Tiled Floor Before Cleaning Marble Tiled Floor After Cleaning

Sealing Marble Tiles

Once the floor was polished we applied a couple of coats of Tile Doctor Pro-Seal which is a non-sheen premium sealer recommended for natural stone that provided the natural matte look the client was after and will protect the Marble and keep the floor looking good.

Marble Floor Tiles Restored in Perth

Victorian Hallway Tiles Cleaned and Sealed in Glasgow

These Victorian tiles at a residence in Glasgow went through a dramatic change after we restored the colours and appearance. You can see from the photograph below the tiles were dull, stained and there was also paint splashes in various places.

Victorian-Tiled-floor-in-Glasgow-Before-cleaning

Cleaning a Victorian Floor

Firstly the floor was swept out and vacuumed to remove all loose debris; we then covered the entire floor with a strong solution of Tile Doctor Remove and Go combined 50/50 with NanoTech Ultra Clean which was left to dwell on the floor for an hour so it could soak into the tile. This floor did not have a previous sealer applied however the solution helped to break down the ground in dirt in the tiles and also remove the paint splashes.

The dirty solution was then extracted off using a wet vacuum and the floor rinsed with clean water several times to remove any chemical residue. Next we mixed a 50/50 solution of Tile Doctor Pro Clean and NanoTech Ultra Clean which was then scrubbed into the tile using a black scrubbing pad on a rotary machine. This was then removed and floor rinsed again and the floor was cleaned a further three times using a strong solution of Tile Doctor Pro-Clean and extracted with a wet vacuum again followed by a mopping of Neutral Tile Cleaner.

Sealing a Victorian Floor Sealing

Once the floor was dry it was then sealed using four coats of Tile Doctor Seal and Go to achieve the finished result. I recommend Seal and Go for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection.

Victorian-Tiled-floor-in-Glasgow-after-cleaning

 
 

Victorian Tiled floor cleaned and sealed in Glasgow

Terrazzo Tiled Vestibule Cleaned and Polished in Glasgow

This Terrazzo tiled vestibule in Glasgow was completely dull and lacking colour when we arrived, this area probably see’s the most foot traffic in the house so it must of seen a fair amount of wear and abuse over the years.

Terrazzo tiled vestibule in Glasgow before cleaning

Cleaning Terrazzo Tiles

Terrazzo is a very hard surface and needs to be burnished in the same way as you would treat Marble or Travertine, before we could do that thought we needed to remove any loose debris etc. that could scratch the surface during the burnishing process to the first job was to sweep out the area with a brush and vacuum up any loose debris etc.

It was a very tight area so use of our large Bonnet machine was ruled out and we opted instead for a small handheld rotary machine fitted with the diamond encrusted burnishing pads. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish. After each pad was used the area was thoroughly rinsed with clean water to remove any excess polish before moving onto the next, once we had gone through all four pads the floor was left clean ,smooth, and shiny.

Sealing Terrazzo Tile

Once the burnishing process was completed we proceeded to seal the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the natural colours.

Terrazzo tiled vestibule in Glasgow after cleaning

Although quite intensive due to the space restriction it was quite a small area so it took just less than a day to complete.
 
 

Terrazzo Tiled Vestibule restored in Glasgow

Travertine Tiled Wet Room Refresh in Glasgow

This Travertine wet room in Glasgow was in a sorry looking state, the tiles had become very dull and there was evidence of mould especially around the silicone.

Travertine Wetroom Glasgow Before Cleaning

Cleaning a Travertine Wet Room

The first job was to cut out all the mouldy silicone around the bottom of the shower cubicle; which had the added advantage of allowing us to clean the adjacent tiles right to the edges. Once the silicone was removed we decanted a dilution of Tile Doctor Pro-Clean into a spray bottle and began to spray it onto the wall tiles. Pro-Clean in an effective alkaline tile cleaner designed for use on stone tiles such as Travertine, spraying the product onto the wall allows it to mix with air making it lighter and easier to stick and soak into a vertical surface. The wall tiles and grout were then scrubbed using a stiff brush until the dirt and mould had been cleaned away.

Polishing Travertine Wall and Floor tiles

Once there tiles were free of dirt and mould we then used a set of six inch diamond encrusted burnishing pads with a hand held rotary machine to polish the travertine. The burnishing pads come in a set of four and you start with a coarse pad with a little water and work your way through the set moving from a the coarse pads through to the less abrasive pads; this process polishes the stone more and more until you get a smooth finish.

Sealing Travertine Tiles

Once the burnishing process was completed we then sealed the stone with two coats of Tile Doctor Colour Grow which is a colour enhancing sealer designed to protect the stone whilst lifting the colours out of the stone. Finally to finish off the job we renewed the silicone seal with Jasmine silicone around the floor and up the corners.

Travertine Wetroom Glasgow After Cleaning

The job took the best part of a day and I think you will agree the results speak for themselves.

Travertine Tiled wet room Cleaned, Polished and Sealed in Glasgow

Victorian Tiled Floor Restoration in Glasgow

This Victorian tiled floor was located in the west end of Glasgow, the owner had discovered the tiles under the carpet and wanted to have them restored as an original feature. When we arrived the floor was still covered in carpet glue, cement, and hessian backing from the carpet that had been stuck to the tiles.

victorian-tiled -floor-in-Glasgow-before

Cleaning a Victorian Floor

The first job was to scrape off as much hessian backing and glue as we could with large scrapers and brushed all loose debris away. We then covered the entire floor with a strong solution of Tile Doctor Remove and Go combined with NanoTech Ultra Clean to create an effective coatings remover; this was then left on the floor to dwell for an hour in order to break down and soften the adhesive etc. The floor was then wet extracted and rinsed with clean water several times to remove any excess residue. This allowed us to see what glue was left which was then removed using a steamer. After this we cleaned the floor three times using Pro-Clean and a black buffing pad on a rotary bonnet machine to clean the floor; again all the dirty water was wet extracted with a wet vacuum and the floor neutralised with more water to ensure no chemicals remained on the floor prior to sealing.

Sealing a Victorian Floor Sealing

The floor was left to dry overnight and we came back the next day to seal it with four coats of Tile Doctor Seal and Go which is an ideal sealer for Victorian tiled floors as it leaves a low sheen finish whilst providing excellent stain protection. You have to wait for each coat to dry before moving on to the next so it did take a while.

victorian-tiled -floor-in-Glasgow-after

This was a tough job but certainly well worth the effort as the floor has been completely transformed and now looks fantastic.
 
 

Victorian Tiled floor restored in West Glasow